Loading...

Box Roof Tray Mounting Kit

SKU: N/A Category:

*IVA Incluido / VAT Included

45.00

The Roof Tray is designed to be used on a variety of roof support systems with little or no need for added engineering on your part. The array of laser cut holes in the bottom of the tray are designed to bolt the tray to your roof support system, and are placed so as to not coincide with the ridges in the bottom of the Nomad Boxes. The bolt heads fall between ridges and in the space created between the bottom of the box and the base of the ridges. Since we intend the tray to be adaptable to any roof mounting system, from universal roof bars to your aluminum roof rack and even roll bars with cargo racks, we can, if desired, supply the tray with two alternative bolt and retaining plate lengths.

See descriptions and specifications below

Clear
Loading...

Description

See attached sketches for the two different mounting systems and chose which would best fit your needs. In some cases, you may need to fit a different bolt length to the mounting kit, but the rest of the hardware should be usable. It is optional, so you can also tackle the mounting of the tray on your own, if you wish. Some roof racks come with bolt slots and you should be able to directly bolt the Roof Tray to the roof rack with the appropriate bolts.

Designed and manufactured 100% by us in the EU, we feel The Nomad Box Security Roof Tray is a great way to carry your Nomad Boxes.

Go to Installation Guide

See attached sketches for the mounting system or chose which would best fit your needs.

Additional information

Weight N/A
Kit de montaje

Box Roof Tray Mounting Kit 1 Long Plate/ Sort Bolt, Box Roof Tray Mounting Kit 2 Short Plate/ Long Bolt

Specifications

Mounting Kit 1

System intended for roof racks with wide flat sections. This kit comes with long retaining plates and short bolts. (See attached sketch)

  1. Mounting Kit 1 for Roof Tray – Long Plates s / Short Bolts.
  2. Typical installation on a roof rack.
  3. Parts List.
    • 4 Aluminium plates 135 x 42 x 6 mm.
    • 8 Allen bolts M8 x 45 mm.
    • 16 M8 flat washers.
    • 8 Grove M8 washers.
  4. Notes: The Ceiling Tray Assembly Kit 1 is for support systems that have a maximum width of 81 mm and a maximum height of 23 mm. These will typically be roof rails with slats. Care should be taken when tightening the screws with excessive force as they could bend the aluminium tray. You will need an Allen key H5 and a 13mm key.
  5. Long Plate / Plan View.
  6. M8 flat washer.
  7. Roof Tray Base / Section.
  8. Retaining Plate / Section.
  9. Flat washer and split washer. M8
  10. Roof Rack profile / Section.
  11. M8 nuts / M6 x 45 mm screws.
  12. Maximum width 81 mm.
  13. Maximum height 23 mm.

Mounting Kit 2

System intended for roof bars and cargo racks and it comes with short retaining plates and long bolts.

  1. Mounting Kit 2 for Roof Tray – Short Plates / Long Bolts.
  2. Typical installation on roof bars.
  3. Typical installation cargo rack.
  4. Parts List.
    • 4 Aluminium plates 90 x 40 x 6 mm.
    • 8 Allen bolts of M8 x 65 mm.
    • 16 M8 flat washers.
    • 8 Grove M8 washers.
  5. Notes: Mounting Kit 2 for Roof Tray is for support systems that have a maximum width of 36 mm and a maximum height of 43 mm. These will typically be roof bars and cargo racks, even roof racks, if you prefer to anchor at the level of secondary supports under the primary rack platform. Care should be taken when tightening the screws with excessive force as they could bend the aluminium tray. You will need an Allen wrench H5 and a 13mm spanner.
  6. M8 flat washer.
  7. Roof Tray Base / Section.
  8. Retaining Plate / Section.
  9. M8 Flat washer and split washer.
  10. Roof Bar / Section.
  11. M8 nuts / M6 x 65 mm screws.
  12. Maximum width 36 mm.
  13. Maximum height 43 mm.
  14. Cargo rack / Section.
  15. M6 x 65 screws.
  16. M8 nuts.
  17. Maximum width 36 mm.
  18. Maximum height 43 mm.

Reviews

There are no reviews yet.

Be the first to review “Box Roof Tray Mounting Kit”

Your email address will not be published. Required fields are marked *